AC RECOVERY SERIES WINCHES 1000kg
AC1000 Series Pulling Winch with FREESPOOL
AC1000a (1000kg), AC1000b (1000kg)
110v or 240v x 1ph / 415v x 3ph AC
See pop-up below photo left for dimensions
FEATURES INCLUDE
• Single or 3 phase options
A choice of 110v, 240v or 415v across the range
• Integral brake
Provides instant, safe braking
• Low profile
Allows winch to be installed in narrow spaces
• Freespool clutch
Enables easy unspooling of wire rope
• Heavy duty mounting plate and roller guide
For quick and simple installation
• Motor to IP54 as Standard
Other options available on request
• 2 metre pendant control
Pre-wired to the winch with 2 buttons and
emergency stop
• 2 metre power lead
Pre-wired to the winch with commercial type plug
ADDITIONAL EQUIPMENT
• Wire rope
• Low voltage control (Standard on 415v x 3ph)
• Radio remote control - via low voltage control
• Weather proof enclosure
Special winches can be built to customer requrements - see examples right
SELECTING A WINCH - THINGS TO CONSIDER
• The mass in kg of the loads compared to the load
rating of the winch
• Wire rope length, diameter and the line speed
• Frequency of use
• Life expectancy of machinery
• Compatibility with application
• Type of power likely to be available on sites
and access / suitable areas
• Health & Safety Regulations and suitable training
Winches can be dangerous.
Installations should be carried out by a professional
with regard to electrical and mechanical safety
requirements.
It is usually advisable to over specify the capacity of
a winch to ensure extended product life.
EN 14492-1 SAFETY REQUIREMENTS INCLUDE:
• Ropes for pulling or dragging require a minimum
of 3:1 factor of safety between rated load and
minimum braking load of the wire rope - and a
10:1 factor of safety between rope and drum
diameters.
• It should not be possible for the wire rope to run
off the side of the drum.
• The rope winding on the drum shall remain a
minimum of 11/2 times the rope diameter from the
outer periphery of the drum flange.
• A minimum of 7 wraps of rope must be retained on
the drum to secure rope anchorage.
*EN 14492-1 is a legally binding EU Health & Safety requirement.
This is the joint responsibility of the supplier, the installer
and the company operating the product.
For further information please contact the Dale's sales team.
|
This is a quotation request product
To recieve your quotation select model and any options required and add to cart. You can mix priced and quotation request products in your shopping cart, if required. Adjust quantity, for delivery option select quotation request, enter your details, select your preferred payment option (Protx not available for quotations) and we will quote accordingly.
|
.jpg){kind=small}
