|
AC WINCHES 3000kg & 4000kg
AC3000 SERIES Pulling Winch with FREESPOOL
For specifications see pop-up under photo right
AC3000a (3000kg), AC3000b (4000kg)
415v x 3ph AC
FEATURES INCLUDE
• Braked motor
Provides instant, safe braking
• Low voltage control
Only 24v in the hand set
• Heavy duty mounting plate and roller guide
For quick and simple installation
• Freespool clutch
Enables easy unspooling of wire rope
• Motor to IP54 as Standard
(Other options available on request)
• 3 metre pendant control
Pre-wired to the winch with 2 buttons and
emergency stop
• 2 metre power lead
Pre-wired to the winch with commercial type plug
ADDITIONAL EQUIPMENT FROM WINCHMASTER
• Wire rope
• Tension roller
• Radio remote control
• Skid mounting frame
• Weather proof enclosure Optional
|
SELECTING A WINCH - THINGS TO CONSIDER
• The mass in kg of the loads compared to the load
rating of the winch
• Wire rope length, diameter and the line speed
• Frequency of use
• Life expectancy of machinery
• Compatibility with application
• Type of power likely to be available on sites
and access / suitable areas
• Health & Safety Regulations and suitable training
Winches can be dangerous.
Installations should be carried out by a professional
with regard to electrical and mechanical safety
requirements.
It is usually advisable to over specify the capacity of
a winch to ensure extended product life.
EN 14492-1 SAFETY REQUIREMENTS INCLUDE:
• Ropes for pulling or dragging require a minimum
of 3:1 factor of safety between rated load and
minimum braking load of the wire rope - and a
10:1 factor of safety between rope and drum
diameters.
• It should not be possible for the wire rope to run
off the side of the drum.
• The rope winding on the drum shall remain a
minimum of 11/2 times the rope diameter from the
outer periphery of the drum flange.
• A minimum of 7 wraps of rope must be retained on
the drum to secure rope anchorage.
*EN 14492-1 is a legally binding EU Health & Safety requirement.
This is the joint responsibility of the supplier, the installer
and the company operating the product.
For further information please contact the Dale's sales team.
|
