.Assist (DDA) Assemblies

INTERCLAMP ASSIST
The Interclamp Assist range has been specially designed to help compliance with the Disability Discrimination Act (DDA) and the Building Regulations Part M:2004. Unlike many brands, the Assist range is assembled very quickly and easily by hexagon key, with no riveting, drilling of tube, welding, threading or specialist tools required. Furthermore, no other special fittings are required, which enables full integration with both new Interclamp systems and the refurbishment or upgrading of existing tubular structures to help meet the newer access specifications.

In order to meet the requirements of the above standards, the range forms flush joints with size C42 tube. Tube (and fittings where necessary) may be coated in BS or RAL colours to help meet "not cold to the touch" and contrasting colour requirements. Steps and disabled access slopes may easily be accommodated, facilitating compliance with public access standards.

Please note, in common with type 150, tubes must be 42.4mm od x 3.2mm wall thickness eg. 1 1/4" medium weight to BS EN 10255 (formerly 1387). All cut tube ends must be deburred and treated with Interclamp Silver Galvanising Spray or other suitable protection. Optional O-rings may be fitted to each end of the expanding Assist fittings to achieve the best finish. Patent applied for.