[ekm]61x120[ekm].jpg) | Camlok 92 series Vertical Plate Clamps
Manufactured from high grade heat treated steel and are suitable for all structural steel up to 300 Brinell Surface Hardness. 0.5t to 3.0t capacities
£119.00 |
| |
| |
|  | DBT Drum Turning Grab
Designed to lift drums in the vertical position and turn
them through 90degreesto the horizontal position.
Can be used to tip containers to 180 degrees but it can
not place the drum down in this position.
Jaws are lined with hardwearing rubber pads.
Fitted with adjustable height legs supported on rollers.
Long handles assist when turning the drum.
£1,180.00 |
|
 | DBV Drum grab
Designed to lift and transport steel drums. The jaws are lined with rubber ribbed pads. The drum is gripped firmly when being lifted. Jaw-supports pivot and remain vertical when lifting. Can be fitted with anautomatic open / close device. Drums can be stacked remotely from floor level.
£945.00 |
|  | DC500 Quick Drum Clamp
This clamp permit the safe handling of all types of flanged drums with or without lids.
£117.00 |
|
|  | PP Series Pile Puller Clamps
Designed to pull out driven piles and/or trench shielding. Recommend with the use of a load indicator / Load cell.
Narrow opening and deep slot to ensure a firm grip. Supplied as standard with a double locking mechanism.
£389.00 |
|
|  | TBG Block Grabs (Small and large jaw capacities)
Camlok Scissor Block Grab
Camlok TBG Block Scissor Grab
200kg, 300kg, 500kg and 1000kg, various block size options available
Designed to handle objects with square parallel edges.
Rubber pads will only restrict the material from slipping if the material is free from oil, dirt etc.
Grabs operate with a scissor action.
Swivelling jaws to allow parallel lifting.
Supplied as standard with large rubber pads
£565.00 |
|
 | TCK Single Arm C-Hook Coil Handler
The Camlok range of C-Hooks has been designed to safely and efficiently handle coils, rolls, rings, pipes, round stock and other similar loads - QUOTATION REQUEST PRODUCT
£0.00 |
|  | TCS Universal Coil Turning Hooks
The TCS coil hook is a universal C-Hook. It incorporates a tipping feature which allows the coil to be lifted or lowered whether the coil is flat or upright. The tipping device also serves the purpose of preventing accidental slipping of the load during transport
£203.00 |
|
|
.jpg){kind=small}
.jpg){kind=small}
