|
CWG WINCHES 400-600 kgs
CWG10151 (400 - 480kg)
CWG30151 (400 - 600kg)
Rated on 3rd layer of rope
240v x 1ph or 415v x 3ph AC
FEATURES INCLUDE
• Single or 3 phase options -A choice of 240v or 415v across the range
• Electromagnetic brake - Provides instant, safe braking
• Bi-rotational - CWG winches can be installed with wire rope coming off the bottom of the drum, or the top
• Enclosed drum flange - Prevents rope becoming trapped between drum
and support casing
• Includes skid mounting frame
• Low voltage control
24v AC, pre-wired to the winch with 2 button - control and emergency stop
• Complete with wire rope 9mm x 38m galvanised for longer life
• Quiet running - Conforms to noise pollution regulations
• Cast steel foot mounting - For easy installation
• 360º weighted safety hook Swivel type with safety catch
• 2 metre power lead - Pre-wired to the winch with commercial type plug
• Motor to IP54 as standard
See pop-up chart under photo left for specifications
SELECTING A WINCH - THINGS TO CONSIDER
• The mass in kg of the loads compared to the load
rating of the winch
• Wire rope length, diameter and the line speed
• Frequency of use
• Life expectancy of machinery
• Compatibility with application
• Type of power likely to be available on sites
and access / suitable areas
• Health & Safety Regulations and suitable training
Winches can be dangerous.
Installations should be carried out by a professional
with regard to electrical and mechanical safety
requirements.
It is usually advisable to over specify the capacity of
a winch to ensure extended product life.
EN 14492-1 SAFETY REQUIREMENTS INCLUDE:
• Ropes for pulling or dragging require a minimum
of 5:1 factor of safety between rated load and
minimum braking load of the wire rope - and a
15:1 factor of safety between rope and drum
diameters.
• It should not be possible for the wire rope to run
off the side of the drum.
• The rope winding on the drum shall remain a
minimum of 11/2 times the rope diameter from the
outer periphery of the drum flange.
• A minimum of 7 wraps of rope must be retained on
the drum to secure rope anchorage.
*EN 14492-1 is a legally binding EU Health & Safety requirement.
This is the joint responsibility of the supplier, the installer
and the company operating the product.
Select model below to view its price - Add to cart to buy on line now or
for further information please contact our sales team.
|
