Vertical safety lifting clamp IP10 is suitable for the lifting, turning (180°) and vertical transfer of steel plates and constructions.
The IP10 lifting clamp is fitted with a locking device for both open and closed positions, which ensures complete safety.
The IP10 lifting clamps with a W.L.L. of 12 tonnes and above are fitted with special hook-up facilities to enable
easy fitment of the clamp in horizontal position.
Higher WLL and different jaw-apertures upon request.
Minimum load permitted:
5% of the WLL applying to plate surface hardness 27 Rc (900 N/mm2)
10% of the WLL applying to plate surface hardness 37 Rc (1170 N/mm2)
Pictures of the clamp in use
.jpg){kind=small}
