To receive your quotation please advice model required
Camlok Coil Handler - Camlok TCK C-Hook Coil Handler
The Camlok range of C-Hooks has been designed to safely and efficiently handle coils, rolls, rings, pipes, round stock and other similar loads.
Many features are available on C-hooks. When lifting collared or standard pipes, the backstop device can be positioned as far back as possible.If the lifting of shorter pipes is required the backstop can be adjusted accordingly. Loads that are longer, or exceed the specified working load limit, should not be lifted.
Camlok uses the latest 3D Cad design technology to quickly produce specific products tailored to our customer's requirements. There are many additional options available including shaped tines and adjustable end-stops.
Applications
Designed for lifting & handling pipe section, coils, rolls & rings etc in the horizontal position. If collared pipes are to be lifted adjust the balance adjustment accordingly. Never try to lift a load longer than the length specified. Maximum working load limit must not be exceeded.
Restrictions
If collared pipes are to be lifted adjust the balance adjustment accordingly. Never try to lift a load longer than the length specified. Maximum working load limit must not be exceeded.
For collard / standard pipes ensure the back stop is positioned as far back as possible. For short lengths of pipe the backstop should be positioned accordingly.
Always consult the operating instructions prior to use.
Options
The tine length and usable height most commonly requested can be found in the table below. Other working loads, and models are available on request.
| Model |
WLL
kgs |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
J (mm) |
| TCK 0.5 / 300 |
500 |
300 |
570 |
120 |
20 |
50 |
400 |
60 |
20 |
25 |
| TCK 0.5 / 500 |
500 |
500 |
580 |
120 |
20 |
65 |
400 |
60 |
20 |
23 |
| TCK 0.5 / 800 |
500 |
800 |
580 |
120 |
25 |
70 |
400 |
60 |
25 |
23 |
| TCK 1.0 / 300 |
1000 |
300 |
620 |
120 |
25 |
70 |
450 |
60 |
20 |
23 |
| TCK 1.0 / 500 |
1000 |
500 |
630 |
120 |
20 |
80 |
450 |
60 |
25 |
23 |
| TCK 1.0 / 800 |
1000 |
800 |
630 |
120 |
30 |
90 |
450 |
60 |
30 |
23 |
| TCK 2.0 / 300 |
2000 |
300 |
700 |
150 |
25 |
90 |
500 |
75 |
25 |
38 |
| TCK 2.0 / 500 |
2000 |
500 |
700 |
150 |
30 |
110 |
500 |
75 |
30 |
38 |
| TCK 2.0 / 800 |
2000 |
800 |
720 |
150 |
30 |
125 |
500 |
75 |
30 |
38 |
| TCK 2.0 / 1000 |
2000 |
1000 |
720 |
150 |
20 |
125 |
500 |
75 |
40 |
35 |
| TCK 3.0 / 300 |
3000 |
300 |
700 |
150 |
30 |
105 |
500 |
75 |
30 |
38 |
| TCK 3.0 / 500 |
3000 |
500 |
700 |
150 |
20 |
125 |
500 |
75 |
30 |
40 |
| TCK 3.0 / 800 |
3000 |
800 |
720 |
150 |
25 |
140 |
500 |
75 |
40 |
40 |
| TCK 3.0 / 1000 |
3000 |
1000 |
720 |
150 |
20 |
155 |
500 |
75 |
40 |
40 |
| TCK 5.0 / 500 |
5000 |
500 |
800 |
200 |
25 |
145 |
550 |
100 |
40 |
45 |
| TCK 5.0 / 800 |
5000 |
800 |
800 |
200 |
30 |
160 |
550 |
100 |
50 |
45 |
| TCK 5.0 / 1000 |
5000 |
1000 |
820 |
200 |
30 |
180 |
550 |
100 |
50 |
45 |
| TCK 5.0 / 1250 |
5000 |
1250 |
820 |
200 |
30 |
200 |
550 |
100 |
50 |
45 |
| TCK 7.5 / 800 |
7500 |
800 |
900 |
220 |
35 |
200 |
600 |
110 |
50 |
50 |
| TCK 7.5 / 1000 |
7500 |
1000 |
900 |
220 |
35 |
200 |
600 |
110 |
60 |
50 |
| TCK 7.5 / 1250 |
7500 |
1250 |
900 |
220 |
35 |
220 |
600 |
110 |
60 |
45 |
| TCK 7.5 / 1500 |
7500 |
1500 |
920 |
220 |
35 |
220 |
600 |
110 |
70 |
50 |
| TCK 10.0 / 1000 |
10000 |
1000 |
980 |
250 |
40 |
220 |
650 |
130 |
70 |
50 |
| TCK 10.0 / 1250 |
10000 |
1250 |
1000 |
250 |
45 |
240 |
650 |
130 |
70 |
55 |
| TCK 10.0 / 1500 |
10000 |
1500 |
1000 |
250 |
45 |
240 |
650 |
130 |
80 |
55 |
 |
For special sizes - Please provide load details - Dims A, B & C plus WLL
Many options including shaped tines and adjustable load stops are available.
.jpg)
|
