Topal BP Clamps for Loads with Parallel Sides

Directions for use
Semi-automatic clamp: the clamp is locked in an open position. To carry out the lift, the operator must activate the lever (manual unlocking) and hold it up whilst starting off the lift. When laying down the load, the clamp automatically locks itself open. The clamping is proportional to minimise any damage to the load. Pads are covered with interchangeable rubber.

Use Restrictions

Check that the pads are free from grease or oil. Degrease the pads regularly. Never lift greasy products or loads with smooth surface (polished marble for instance). Only lift one load at a time. Other jaw coatings are available upon request. Operating temperature: -20 to +90°C.