Select model for pop-up charts right to recieve your competitive quotation
For lifting and laying pipes, bars, tubes designed to accommodate a wide variety of materials.
Semi-automatic clamp
The clamp is locked open. To carry out the lift, activate the lever (manual unlocking) and hold it up whilst starting off the lift. When laying down, the clamp automatically locks itself open.
Automatic clamp (double-effect lock)
Allows load handling without operator intervention. To operate, lower the clamp onto the load, this willdisengage the mechanism and lift theload. When lowering: lower the load to the resting point and continue to lower until the locking mechanism is engaged, locking the clamp open. The clamping is proportional to the load to minimise the risk of deformation.
Ve rtical lifting only. Check the load is horizontally level when lifting with a single clamp. Use in pairs with a lifting beam for lifting long pipes. It is possibile to add a covering on the bearing parts for fragile surfaces.
Operating temperature: -20° to + 100° C.
• Two available models: semi-automatic and automatic.
• Wide bearing surface for better handling.
• Proportional clamping to minimise any damage to the load.
