To recieve your quotation please advise model No. and optional extras required.
New from Yale an endless lifting winch/ hoistdesigned to be used with unlimited rope lengths for lifting and pulling. Capacities range from 500kg to 980kg at either 9 or 18 m/min. Suitable for passenger elevation when used with special safety devices
The new Yale MTrac endless winch is versatile and suitable for unlimited applications. The rope is not connected which makes it compact, lightweight and very easy to handle. The unrestricted wire rope lengths capability of the Yale M-Trac makes it possible to utilise unlimited lifting heights and traction lengths.
Features and Benefits
- The robust, precisely machined housing of die-cast aluminium, ensures a low dead-weight and outstanding rigidity.
- Gearing and drive sheave is fabricated from hardened steel.
- Universal attachment of the winches is capable by means of a central 16mm load pin, or two M10 screws.
- Group of mechanisms: 1 Bm/M3 (1 Cm/M2 for 18 m/min models) according to FEM.
- Motor protection: Protected to IP55 as standard.
- Standard MTrac operating voltage: 400V, 3ph, 50Hz (460V, 3ph, 60Hz available upon request).
- Control Voltage: 24V for mobile application units and 42V for the stationary applications models.
- Phase monitoring: As standard on mobile application models, not available on stationary units.
- Hoist motor, as standard is fitted with a thermal overload protection device.
- Certification: Certified by and independent inspection institute (DGUV).
- Drive sheave and pressure rollers of special nitrided steel with a surface hardness of approximately 70 HRC, guaranteeing low wear of these components
- The fully-synthetic special oil ensures highest possible efficiency for quiet running characteristics, in a temperature range of -40°C to 70°C.
- Standardised components ensures easy access to all wearing parts.
- Certified for passenger elevation applications in accordance with DIN EN 14492-1 by an independent inspection institute (DGUV).
 |
|
Safety Lowering Mechanism
|
|
In the event of a power failure, the electric-mechanical brake can be released manually in order to ensure safe and controlled lowering of the load.
Safe lowering is guaranteed by the integrated centrifugal force brake.
|
|
 |
|
Flexible Attachment Points
|
|
The winch can be suspended from a central suspension point by means of a load pin.
As an alternative, attachment points in the corners of the housing are available for flexible attachment of the winch with screws or pins.
|
|
Optional extras
- Other operating voltages.
- Double control for several winches.
- Radio remote control.
- Limit switch for upward travel.
- Counters for operating hours and number of starts.
- Catching devices (over-speed or inclined position tripping, required for passenger elevation applications).
- Adaptor for fitting with shackle.
- Ropes for endless winches and catching device.
- Overload cut-out (included in the scope of supply for passenger elevation winches).
 |
|
Overspeed safety catching device (YOSL)
|
|
The overspeed catching device is automatically tripped when the lowering speed of the cable exceeds 30m/min (0.5m/s).
The integrated clamping jaw mechanism made of hardened steel stops the lowering of the wire rope within a few centimetres.
|
|
 |
Inclined position safety catching device (YISL)
|
The inclined position catching device is automatically tripped when the angle of the rope or the platform exceeds 5°.
The integrated clamping jaw mechanism holds the rope and immediately stops the movement of the system.
|
|
|
Model
|
EAN-No. 4025092*
for stationary
application**
|
EAN-No. 4025092*
for mobile
application***
|
Capacity
|
Lifting speed
|
Nominal
rope
dia.
|
Motor
|
Weight for
stationary
application**
|
Weight for
mobile
application***
|
|
kg
|
m/min
|
mm
|
kW
|
kg
|
kg
|
|
YMT 5-9-M8
|
*668569
|
*668644
|
500
|
9
|
8.4
|
1.1
|
54
|
62
|
|
YMT 5-18-M8
|
*668576
|
*668651
|
500
|
18
|
8.4
|
2.0
|
54
|
62
|
|
YMT 6-9-M8
|
*668583
|
*668668
|
600
|
9
|
8.4
|
1.1
|
55
|
63
|
|
YMT 6-18-M8
|
*668590
|
*668675
|
600
|
18
|
8.4
|
2.0
|
55
|
63
|
|
YMT 8-9-M8
|
*668606
|
*668682
|
800
|
9
|
8.4
|
1.8
|
55
|
63
|
|
YMT 8-18-M8
|
*668613
|
*668699
|
800
|
18
|
8.4
|
3.6
|
56
|
64
|
|
YMT 10-9-M9
|
*668620
|
*668712
|
980
|
9
|
9.0
|
1.8
|
55
|
63
|
|
YMT 10-18-M9
|
*668637
|
*668705
|
980
|
18
|
9.0
|
3.6
|
56
|
64
|
** incl. control voltage 400 V, 3 Ph, 50 Hz, directly attached to the winch, pendant control with emergency-stop (length of control cable 3 m)
*** incl. control cabinet with integrated CE-connector, pendant control with emergency-stop (length of control cable 3 m)
|
All models
|
Dimensional Drawing
|
|
D, mm
|
10.5
|
|
|
E, mm
|
40
|
|
F, mm
|
57
|
|
G, mm
|
261
|
|
H, mm
|
34
|
|
J, mm
|
261
|
|
K, mm
|
220
|
|
L, mm
|
180
|
|
M, mm
|
301
|
|
N, mm
|
375
|
|
O, mm
|
599
|
Safety Device Dimensional Information
| Overspeed safety catching device (YOSL) (mm) |
Inclined position safety catching device (YISL) (mm) |
 |
 |
