UK Sales:0161 223 1990

International:00 44 161 223 1990

STRAIGHTPOINT SOFTWARE & ACCESSORIES FOR WIRELESS LOADCELLS

Product was successfully added to your shopping cart.
key features A full array of wireless accessories are available for use with your wireless Straightpoint load cells Data logging software allowing for simultaneous control, Proof Test plus software Centre of Gravity software Signal boosters, LED wireless scoreboards and base stations with analogue (4-20mA, 0-10v, 0-5v Figital (RS232/485, Modbus RTU, and ASCII serial communications protocol) outputs.

This product is available to buy online today or can be added to a quotation request. Simply select Add to Cart or Add to Quote, depending on what you require. You can add multiple items to your quote if required then simply review and submit your quote.

Product Name/Size Price per unit QTY
Centre-of-Gravity-(CofG)-software-with-extended-range-USB-base-station-WCOGS
Price From: £409.60 (Ex VAT) Incl. Tax: £491.52 (Inc VAT)

RRP: £512.00
£614.40 (Inc VAT)

Multiple-wireless-loadcell-controller-software-with-extended-range-USB-basestation-SW-MWLC
Price From: £409.60 (Ex VAT) Incl. Tax: £491.52 (Inc VAT)

RRP: £512.00
£614.40 (Inc VAT)

Proof-test-plus-software-with-extended-range-USB-base-station-SW-PTP
Price From: £843.20 (Ex VAT) Incl. Tax: £1,011.84 (Inc VAT)

RRP: £1,054.00
£1,264.80 (Inc VAT)

Handheld-plus-for-wireless-loadcells-SW-HHP
Price From: £670.40 (Ex VAT) Incl. Tax: £804.48 (Inc VAT)

RRP: £838.00
£1,005.60 (Inc VAT)

ATEX/IECEx-Ex-ia-IIC-T4-Ga-Zone-0-Handheld-plus-SW-HHP-ATEX
Price From: £908.00 (Ex VAT) Incl. Tax: £1,089.60 (Inc VAT)

RRP: £1,135.00
£1,362.00 (Inc VAT)

Wireless-overload-alarm-system-SW-OAM
Price From: £801.60 (Ex VAT) Incl. Tax: £961.92 (Inc VAT)

RRP: £1,002.00
£1,202.40 (Inc VAT)

Wireless-base-station-with-analogue-output-SW-A01i
Price From: £740.80 (Ex VAT) Incl. Tax: £888.96 (Inc VAT)

RRP: £926.00
£1,111.20 (Inc VAT)

Wireless-base-station-with-RS232-output-SW-SO
Price From: £740.80 (Ex VAT) Incl. Tax: £888.96 (Inc VAT)

RRP: £926.00
£1,111.20 (Inc VAT)

Wireless-100mm-LED-remote-scoreboard-display-SW-SD
Price From: £1,165.60 (Ex VAT) Incl. Tax: £1,398.72 (Inc VAT)

RRP: £1,457.00
£1,748.40 (Inc VAT)

Advanced-handheld-for-wireless-loadcells-SW-AC
Price From: £1,127.20 (Ex VAT) Incl. Tax: £1,352.64 (Inc VAT)

RRP: £1,409.00
£1,690.80 (Inc VAT)

Wireless-signal-booster-SW-SB
Price From: £740.80 (Ex VAT) Incl. Tax: £888.96 (Inc VAT)

RRP: £926.00
£1,111.20 (Inc VAT)

Wall-or-cab-mount-bracket-for-SW-HHP-SW-AC-or-HHP-SU3282
Price From: £64.80 (Ex VAT) Incl. Tax: £77.76 (Inc VAT)

RRP: £81.00
£97.20 (Inc VAT)

Protective-boot-for-SW-HHP-and-HHP-SU4045
Price From: £28.80 (Ex VAT) Incl. Tax: £34.56 (Inc VAT)

RRP: £36.00
£43.20 (Inc VAT)

Wireless-loadcell-transmitter-SA700C
Price From: £754.40 (Ex VAT) Incl. Tax: £905.28 (Inc VAT)

RRP: £943.00
£1,131.60 (Inc VAT)

Price Total: £0.00(Ex VAT) £0.00(Inc VAT)

or

Delivery Information / Postcode Checker

All of our buy online "Add to Cart" products are shipped via our Standard Delivery method to, most UK postcodes. Usually completed with 2/3 working days, longer for pre-order, made to order products or If time critical, please request a quotation.

If you are within the UK, please use our postcode checker below to see if your delivery cost can be calculated online.

Details

Wireless Loadcell Software - View full details in the Straightpoint brochure available here

Software for the Straightpoint range of wireless loadcells

 Item Part Number  Description 
WCOGS 

Centre of Gravity (CofG) software with extended range USB base station

Wireless Centre of gravity system designed specifically for use when large industrial items such as absorbers, generators, turbines, reactors,boilers, towers, locomotives, boats, military
equipment or offshore industry parts such as oil rigs and production platforms have to be moved. Heavy lift companies need large capacity load cells and easy to use software to quickly report weight and centre of gravity.

 SW-MWLC

Multiple wireless loadcell controller software with extended range USB base station

Straightpoint’s Multiple Wireless Load Cell Controller (SW-MWLC) software package is a versatile, user-friendly, wireless load cell control, display and data logging tool designed for use on
the Windows PC platforms, Vista, Win 7, 8 & 10.

SW-PTP

Proof test plus software with extended range USB base station

Numerous load testing applications worldwide require a load cell to verify the load applied. From crane testing using water bags to pad eye testing using hydraulic tools, the need to document test
procedure and results have never been greater as users of lifting equipment call for more traceability and audit trails.

 HPP App HHP App

Android & iOS app to connect to any SP Bluetooth loadcell - FREE

The HHP app allows you to stand back and remotely monitor the level of force being measured by your SP product in real-time, without the need for troublesome cabling. Once you have downloaded and installed the app on to your smartphone or tablet you will be able to use the Bluetooth feature to connect wirelessly to any Bluetooth enabled wireless SP device

Wireless Loadcell Accessories

Accessories for the Straightpoint range of wireless loadcells

 Item Part Number  Description 
SW-HHP Hand held plus SW-HHP Handheld plus for wireless loadcells

The Handheld plus is a rugged and versatile digital handheld display with a broad range of features and suitable for all Straightpoint load cell products.

At the heart of the ergonomically designed Handheld plus is a powerful PCB providing industry-leading features such as user-selectable units of measure (tonnes, lbs, kg, and kN), programmable audible overload alarm, peak hold, pre-set tare and a user resettable overload counter. 

This crucial overload alarm counter is a requirement for many safety and quality control departments, as it keeps track of overload events, allowing the load cell in question to be removed from service immediately, following the calibration voiding overload event. The load cell in question can then be sent out for proper testing and, if necessary, recalibration before re-entering service.

SW-HHP is suitable for connection to any Straightpoint wireless load cell, has a range of up to 700m/2300ft and is supplied as standard with the Radiolink plus load cell.

 SW-HHP - Atex Wireless Handheld Plus SW-HHP-ATEX

ATEX/IECEx  Ex ia IIC T4 Ga Zone 0 Handheld plus

Intrinsically safe Handheld display unit for reading measurements in hazardous environments; such as on and offshore oil, gas and chemical industries in zones classified 2,1 and 0.

Marking: II 1 G & Ex ia IIC T4 Ga

Certificate Number: SIRA 15ATEX2196X & IECEx SIR15.0072X

 Overload alarm SW-OAM

Wireless overload alarm system

The SW-OAM is a wireless relay module featuring audio and visual warning indicators. The unit’s two set point alarms can be triggered by a single or summed group of up to eight Straightpoint wireless load cells. The SW-OAM is ideal as a Wireless Overload Detection System.

 SW-A01i  Wireless base station with analogue output SW-A01i

Wireless base station with analogue output

SW-A01i


The SW-AO1i provides a configurable analog output for any single Straightpoint Wireless Load Cell and is ideal for integration to a PC, PLC or other Data Acquisition Systems. Housed in a NEMA 4 enclosure the output can be selected from pre-calibrated voltage and current ranges of 0-5vdc, +-5vdc, 0-10vdc, +-10vdc, 0-20mA, 4-20mA.

 SW-SO  Serial output ASCII string module SW-SO 

Wireless base station with RS232 op 

SW-SO 
Serial output ASCII string module

Ideal for integration to a PC, PLC or other device requiring a simple RS232 serial input, this module allows for a user defined ACII string which can include individual or summed data from up to eight Straightpoint Wireless Load Cells.

 SW-SD Wireless slave display SW-SD

Wireless 100mm LED remote scoreboard display

SW-SD
Wireless slave display

This 100mm (4”) scoreboard LED display is wireless and viewable for up to 150 ft. Perfect for installation on a crane gantry the unit operates on 110-240 VAC and display’s an individual load or summed load for up to eight Straightpoint Wireless devices. 


SW-AC Advanced Handheld
SW-AC

Advanced handheld for wireless loadcells

By default, the SW-AC handheld will display the total load on the loadcells. To obtain a total load: Switch on by pressing 1 The display will now show the gross load on all loadcells programmed into the system. To tare the display to zero press 3. If a wireless printer is supplied pressing 3 will print the total and individual loads.

 Signal booster for wireless load cells SW-SB

Wireless signal booster

The SW-SB signal booster/repeater module is battery operated and easily pairs to any Straightpoint Wireless device e.g. load cell, accessories, and software solutions within range, quickly increasing coverage and extending range.

HPP Wall bracket SU3282

Wall or cab mount bracket for SW-HHP, SW-AC or HHP

Constructed from stainless steel and fitted with a viewing angle adjusting mechanism
the SU3282 bracket fits either the HHP or SW-HHP handheld displays.
Ideal for wall or cab mounting leaving the operators hands free to work saf


Hand held rubber boot
SU4045

Protective boot for SW-HHP and HHP

Drop tested to one metre at –30°C this 70SHA rubber boot is purpose moulded to fit and protect the HHP and SW-HHP handheld display against impact when being used in the harshest industrial environments

 

Wireless load cell transmitter

SA700C

Wireless loadcell transmitter

The SA700C transmitter connects to strain gauge transducers such as load cells, torque sensors and pressure transducers allowing them to form part of a Straightpoint wireless system.

Load data from the SA700C can be received by multiple receivers that include SW-HHP handheld, SW-MWLC software or our range of wireless accessories.
The load data transmitted by the SA700C has been designed for battery operation and supports an ultra-low-power sleep mode whilst offering class-leading wireless coverage and range.
Configurable transmission rates from once per day to 200 per second cope with a wide range of measurement and monitoring applications.

Housed in an aerospace grade aluminium enclosure and sealed to IP67 / NEMA6 with no external antennae the SA700C provide a flexible solution to your wireless load cell requirements.

To view a more detailed description please open this website on desktop
  1. Be the first to review this product

Write Your Own Review