All Crosby 320 Eye Hoist Hooks incorporate the following features:
A complete line of Eye hoist hooks.
Available in carbon steel and alloy steel.
Designed with a 5:1 Design Factor for (Carbon Steel); 4:1 Design Factor for (Alloy Steel).
Eye hooks are load rated.
Proper design, careful forging and precision controlled quenched and tempering gives maximum strength without excessive weight and bulk.
Every Crosby Eye Hook has a pre-drilled cam which is equipped with a latch. Even years after the purchase of the original hook, replacement latch assemblies can be added. (Contact us)
Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.
Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
Hoist hooks incorporate two types of strategically placed markings forged into the product which addresses two (2) QUIC-CHECK® features:
Deformation Indicators and Angle Indicators (
The following additional features have been incorporated in the new Crosby S-320N Eye Hoist Hooks. (Sizes 3/4 metric tonne Carbon through 22 metric ton Alloy.)
Metric Rated at 5:1 Design Factor for (Carbon Steel); 4:1 Design Factor for (Alloy Steel).
Can be proof tested to 2 times the working Load Limit.
Low profile hook tip.
New integrated latch (S-4320) meets the World class standard for lifting.
Heavy duty stamped latch interlocks with the hook tip.
High cycle, long life spring.
When secured with the proper cotter pin through the hole in the tip of the hook, meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) for personnel hoisting.
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
Load Limit (t)
Hook ID Code
Eye Hook Stock No.
Weight Each (kg.)
Carbon S-320C S-320CN S.C.
*Eye Hooks (3/4 TC - 22TA), the Proof load is 2 times Working Load Limit. Eye Hooks (20 TC - 60TA). All carbon hooks-average straightening load (ultimate load) is 5 times Working Load Limit. † New 320N style hook.
Hoist hooks incorporate markings forged into the product which addresses two (2) QUIC-CHECK® features.
Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK® measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a measuring device (i.e. tape measure) to measure the distance between the marks. The marks should align to either an inch or half-inch increment on the measuring device. If the measurement does not meet this criteria, the hook should be inspected further for possible damage.
Angle Indicators -- Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.
Hook ID Code*
*Eye Hooks (3/4 TC-22TA), Proof load is 2 times Working Load Limit. Eye Hooks (20 TC-60TA). All carbon hooks - average straightening load (ultimate load) is 5 times Working Load Limit. † 3/4tC - 15tC dimensions shown are for S-4320 Latch Kits. †† Dimensions are for PL-N latch kits
To view a more detailed description please open this website on desktop
Be the first to review this product
Write Your Own Review
Find out more about Crosby from DLH Online
Crosby Bolted Load Rings
Crosby Bolted Load rings can be folded and rotated into all required directions, thereby carrying the full load in any tension direction.
Crosby lifting clamps, like the Crosby IPBU(U)Z Lifting Clamp are ideal for the lifting, transfer and placing of bulb profiles onto ship hulls perpendicularly and come fitted with a locking device for both open and closed positions, which ensures total reliability.
Crosby Cover Hoist Rings
Crosby Cover Hoist Rings like the Crosby HR500 Trench Plate Hoist Ringsare designed to simplify the lifting and placement of steel plates used to cover trenches in streets, providing a standard fitting to be used in place of products not designed for trench cover applications.
An eye bolt is a bolt with a loop at one end. They are used to firmly attach a securing eye to a structure, so that ropes or cables can then be tied to it. Eyenuts are usually fastened to metric threads to provide a strong, secure lifting point. This means that if once the load is in the right place, the eye bolts can be moved and re-used for another application.
Crosby Hooks such as the Crosby L-322CN / L-322AN Swivel Hooksare load rated swivel hooks designed with careful forging and precision-controlled quench and tempering to ensure maximum strength without excessive weight and bulk.
Crosby Lifting Hooks
Crosby Lifting hooks, such as the Crosby G3315 Snap Hooks, are devices designed and applied to the process of grabbing and lifting loads by means of a external machine like a crane or hoist. A lifting hook is typically equipped with a safety latch to prevent the disengagement of the lifting wire rope sling, chain or rope that the load is attached to
DLH Online is the main UK authorised distributor for Thern Inc., alongside being a top UK authorised distributor for the Columbus McKinnon Group (CMCO) who incorporate the Yale, Pfaff Silberblau, Steerman and Camlok brands. DLH Online is also the Main UK authorised distributor for Schilling, Eepos, Erikkila and Codipro. They are also the sole authorised Master UK distributors for Lifts All Sweden alongside being the main North West (UK) authorised distributors for Crosby, RUD, Hackett, Sumner and Donati.
Sign up to our newsletter for all the latest offers