|Standard Capacity||250 kg*||500 kg*||1000 kg*||1600 kg*||2000 kg*|
|Maximum Reach||Up to 8.0 metres||Up to 8.0 metres||Up to 8.0 metres||Up to 6.0metres||Up to 6.0metres|
| Maximum Height under beam||Up to 6.0 metres||Up to 6.0 metres||Up to 6.0 metres||Up to 6.0 metres||Up to 6.0 metres|
|All models can be supplied with foundation fixings or counter plate for chemical bolt fixings (See below)|
|* Standard capacities can be de-rated to suit your application|
Tip: Maximum capacity sizes are shown above or view standard models below.
The electrically rotated jib cranes with a motorised arm in the CBE”Column” version are designed for handling goods in areas which are difficult to reach, where the presence of fixed obstacles would impede the practicability of the working area.
They are used also when the frequency of maneuvers, the entity of the load and the push forces, could cause excessive wear and tear if carried out manually.
“H” over braced version, for lifting capacities from 250 kg to 2000kg and jibs from 4m to 8m
Made using an H-beam section girder, where the hoist-carrying trolley run on the lower flange. The arm is fitted with one or two stay bolts to support the profile which connects it to the rising rotation tube.
This version allows the use of the jib crane for lifting capacities and ranges superior to those of the T version.
The arm allows the addition of electrical or mechanical push-trolleys.
The arm, swiveling on its own axis on revolving bearings, is formed by a supporting girder for the run of the hoist-carrying trolley.
The rotation mechanism
Formed by a motor reducer fixed vertically in the lower part of the support bracket, made with a reducer of epicycloidal type, with gears in a permanent oil and self-braking conical brake motor.
The drive sprocket of the motor reducer fits together with a toothed crown integral with the arm which it powers.The progressive starting up and braking are ensured by a varistor of frequency (inverter) powered by an alternate monophase power with 230V voltage.
Jibs can be supplied with the following options:
- Donati 400V 3ph 50Hz electric chain hoist with single or dual speed and low voltage pendant. manual or pneumatic hoist are available on request
- Special reach and height
- 400v 3ph. 50 Hz Electric feed system with festooned cables and main/off switch on the column
- Foundation bolts and template or by the addition of an extended counter plate which can be used with chemical anchor fixings in suitable existing concrete floor.
- Outdoor use
- Special paint finish e.g. Off-shore use
- Installation - Subject to location
Contact our sales team for advice on 0161 223 1990
Download Donati jib crane brochure for full specifications PDF
Installation and maintenance instructions are provided.
Jib Crane Specifications To view a more detailed description please open this website on desktop
|Type||Lifting Capacity (kg)||Arm (S) (m)||Size of Jib Crane||Total Height (H) m||Speed of Arm||Motor Power||Weight|
| || || || ||Base||Max||R.P.M||Peripheric m/min||KW||Crane (kg)||Column by m|