|Standard Capacity||125 kg*||250 kg*||500 kg*||1000 kg*||1600 kg*||2000 kg*|
|Maximum Reach||up to 8.0 metres||Up to 8.0 metres||Up to 8.0 metres||Up to 8.0 metres||Up to 6.0metres||Up to 6.0metres|
| Maximum Height under beam||up to 5.5 metres||Up to 6.0 metres||Up to 6.0 metres||Up to 6.0 metres||Up to 6.0 metres||Up to 6.0 metres|
|All models can be supplied with foundation fixings or counter plate for chemical bolt fixings (See below)|
|* Standard capacities can be de-rated to suit your application|
Tip: Maximum capacity sizes are shown above or view standard models below.
125 kgs to 2000 kgs capacity - manual slew - Freestanding jibs 300-degree rotation up to 8m reach
H (UB) beam section over braced.
Suitable for use with standard hoists.
Painted with a base and top coat of yellow enamel, subject to preparation of the surfaces by metallic sandblasting. The drying in an oven concludes the cycle.
Jibs can be supplied with the following options:
- Donati 400V 3ph 50Hz electric chain hoist with single or dual speed and low voltage pendant. Alternatively 110V and 240V electric hoists, other brands, manual or pneumatic hoist are available on request
- Special reach and height
- 400v 3ph. 50 Hz Electric feed system with festooned cables and main/off switch on the column
- Foundation bolts and template or by the addition of an extended counter plate which can be used with chemical anchor fixings in suitable existing concrete floor.
- Mechanical Slewing stops
- Outdoor use
- Special paint finish e.g. Off-shore use
Installation - Subject to location
Download Donati jib crane cataloge for full specifications PDF
Contact our sales team for advice on 0161 223 1990
H” over braced version, for lifting capacities from 125kg to 2000kg and jibs from 4m to 8m
The arm is made using an H-beam section, the hoist-carrying trolley runs on the lower flange of the H-beam. The arm is fitted with one or two stay bolts to support the profile which connects it to the rotation tube.
This version allows the use of the jib crane for loads and jibs superior to those possible with the C and T versions. The arm allows the addition of electrical and mechanical push-trolleys.
Installation and maintenance instructions are provided.
|Lifting Capacity (KG)||Arm (S)|
|Size of Jib Crane|
|Column||Total Height H (M)|
|Column by m|
To view a more detailed description please open this website on desktop