We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Titan Extra Large Pallet Gate - Pallet Safety Gates - Pallet Handling - Material Handling
Titan Extra Large Pallet Gate
Key Features
- Meets HSE and Safety professionals requirements for site safety. - Conformance with BS EN ISO 14122-3:2016
- Standard versions with inside width up to 3.5 metres x inside depth up to 4.0 metres
- For mezzanines, process platforms,- Easy to install with installation and operating instructions provided
- Separates personnel from moving loads and falls from unprotected edge.
- Galvanised or Safety yellow thermoplastic coated tube - All parts are replaceable - CE marked
The Titan Extra Large Pallet Gate model is a versatile design with a balanced action which can be readily adapted for standard or non-standard wide loads or multi-pallet applications.
We offer this model made to order for extra wide and or deep applications - Standard inside widths 1.5, 2.0, 2.5, 3.0 and 3.5 metres x inside depths 2.0, 2.5, 3.0, 3.5 and 4.0 metres or intermediate dimensions to suit requirements. Standard load clearance height of 1.8 metres or 2200 mm.
TITAN GATE DIMENSIONS (In mm)* |
|||||||
Titan Model |
Handrail |
Standard Inside (w) ❶ |
Overall |
Overall |
Standard |
Standard |
|
Titan 1800 |
1100
|
1500 w x 2000 d 1500 w x 2500 d 1500 w x 3000 d 1500 w x 3500 d 1500 w x 4000 d 2000 w x 2000 d 2000 w x 2500 d 2000 w x 3000 d 2000 w x 3500 d 2000 w x 4000 d 2500 w x 2000 d 2500 w x 2500 d
|
2500 w x 3000 d 2500 w x 3500 d 2500 w x 4000 d 3000 w x 2000 d 3000 w x 2500 d 3000 w x 3000 d 3000 w x 3500 d 3000 w x 4000 d 3500 w x 2000 d 3500 w x 2500 d 3500 w x 3000 d 3500 w x 3500 d 3500 w x 4000 d
|
Inside
|
Inside
|
2400 |
Optimum |
Titan 2200 | 2800 |
Optimum |
The full specification is shown in the Brochure Download PDF
*Dimensions are approximate only. Due to differences in the tube clamps and the assembly process, the actual dimensions may vary slightly. Any critical dimensions such as hole fixing centres should be determined when the product is actually on your site. We reserve the right to change the design without notice
❶ We recommend that you allow at least 200 mm load clearance for the inside gate Standard finish: All galvanised or Safety yellow thermoplastic tube coating Installation requires 8 x M12 Bolts/Anchors (Not provided) |
Titan Pallet Gate Features and Benefits:
- Conform to BS EN ISO 14122-3:2016 Mezzanine Gate
- All galvanised or Safety Yellow thermoplastic (Warm to touch) coated tube
and galvanised components - 100 mm high Kick plate in aluminium
- Supplied complete for simple installation (Partially dismantled for palletised shipment)
- Installation, operation and maintenance instructions
- Simple Allen key assembly then bolt to floor and use
- Balanced action provides easy opening
- Minimal headroom required
- All component parts are replaceable
- Nylon maintenance-free bushes on all pivot points
- Separates people from moving loads and from falling from an unguarded edge
- Allows the clear view of the operation
- Reinforces sense of security
- Failsafe operation
- CE Marked
Component Specification
Mezzbarriers tube clamps are made from malleable cast iron. Manufactured in conformance with BS EN 1562:1997, a dependable and well-proven material for this type of product. The fittings are then hot-dipped galvanised to BS EN ISO 1461:1999 to produce a durable corrosion-resistant finished surface for extended life. Grub Screws are stainless steel (Tightened to 40 N.m)
Need custom dimensions?
This gate is also offered with special sizes - Custom intermediate sizes up to maximum 3500 mm wide x 4000 mm deep x maximum 1800 mm or 2200 mm load height (Overall height plus 600 mm) - Add special measurements required to quotation request
- Hi-Vis Hazard warning Yellow/Black tube sleeves 1000 mm lengths - Easy to fit and cut to length (sold separately)
Frequently asked questions for pallet gates |
---|