You have no items in your shopping cart.
You have no items to compare.
You have no items in your shopping cart.
Wireless Loadcell Software - View full details in the Straightpoint brochure available here |
||
Software for the Straightpoint range of wireless loadcells |
||
Item | Part Number | Description |
WCOGS |
Centre of Gravity (CofG) software with extended range USB base station Wireless Centre of gravity system designed specifically for use when large industrial items such as absorbers, generators, turbines, reactors,boilers, towers, locomotives, boats, military |
|
SW-MWLC |
Multiple wireless loadcell controller software with extended range USB base station Straightpoint’s Multiple Wireless Load Cell Controller (SW-MWLC) software package is a versatile, user-friendly, wireless load cell control, display and data logging tool designed for use on |
|
SW-PTP |
Proof test plus software with extended range USB base station Numerous load testing applications worldwide require a load cell to verify the load applied. From crane testing using water bags to pad eye testing using hydraulic tools, the need to document test |
|
![]() |
HHP App |
Android & iOS app to connect to any SP Bluetooth loadcell - FREE The HHP app allows you to stand back and remotely monitor the level of force being measured by your SP product in real-time, without the need for troublesome cabling. Once you have downloaded and installed the app on to your smartphone or tablet you will be able to use the Bluetooth feature to connect wirelessly to any Bluetooth enabled wireless SP device |
Wireless Loadcell Accessories |
||
Accessories for the Straightpoint range of wireless loadcells |
||
Item | Part Number | Description |
![]() |
SW-HHP | Handheld plus for wireless loadcells The Handheld plus is a rugged and versatile digital handheld display with a broad range of features and suitable for all Straightpoint load cell products. At the heart of the ergonomically designed Handheld plus is a powerful PCB providing industry-leading features such as user-selectable units of measure (tonnes, lbs, kg, and kN), programmable audible overload alarm, peak hold, pre-set tare and a user resettable overload counter. This crucial overload alarm counter is a requirement for many safety and quality control departments, as it keeps track of overload events, allowing the load cell in question to be removed from service immediately, following the calibration voiding overload event. The load cell in question can then be sent out for proper testing and, if necessary, recalibration before re-entering service. SW-HHP is suitable for connection to any Straightpoint wireless load cell, has a range of up to 700m/2300ft and is supplied as standard with the Radiolink plus load cell. |
![]() |
SW-HHP-ATEX |
ATEX/IECEx Ex ia IIC T4 Ga Zone 0 Handheld plus Intrinsically safe Handheld display unit for reading measurements in hazardous environments; such as on and offshore oil, gas and chemical industries in zones classified 2,1 and 0. |
![]() |
SW-OAM |
Wireless overload alarm system The SW-OAM is a wireless relay module featuring audio and visual warning indicators. The unit’s two set point alarms can be triggered by a single or summed group of up to eight Straightpoint wireless load cells. The SW-OAM is ideal as a Wireless Overload Detection System. |
![]() |
SW-A01i |
Wireless base station with analogue output SW-A01i |
![]() |
SW-SO |
Wireless base station with RS232 op SW-SO |
![]() |
SW-SD |
Wireless 100mm LED remote scoreboard display SW-SD |
![]() |
SW-AC |
Advanced handheld for wireless loadcells By default, the SW-AC handheld will display the total load on the loadcells. To obtain a total load: Switch on by pressing 1 The display will now show the gross load on all loadcells programmed into the system. To tare the display to zero press 3. If a wireless printer is supplied pressing 3 will print the total and individual loads. |
![]() |
SW-SB |
Wireless signal booster The SW-SB signal booster/repeater module is battery operated and easily pairs to any Straightpoint Wireless device e.g. load cell, accessories, and software solutions within range, quickly increasing coverage and extending range. |
![]() |
SU3282 |
Wall or cab mount bracket for SW-HHP, SW-AC or HHP Constructed from stainless steel and fitted with a viewing angle adjusting mechanism |
![]() |
SU4045 |
Protective boot for SW-HHP and HHP Drop tested to one metre at –30°C this 70SHA rubber boot is purpose moulded to fit and protect the HHP and SW-HHP handheld display against impact when being used in the harshest industrial environments
|
|
SA700C |
Wireless loadcell transmitter The SA700C transmitter connects to strain gauge transducers such as load cells, torque sensors and pressure transducers allowing them to form part of a Straightpoint wireless system. Load data from the SA700C can be received by multiple receivers that include SW-HHP handheld, SW-MWLC software or our range of wireless accessories. Housed in an aerospace grade aluminium enclosure and sealed to IP67 / NEMA6 with no external antennae the SA700C provide a flexible solution to your wireless load cell requirements. |